by Bartoli
I noticed lately that two of my Proto 2000 GP30s developed what sounded like a flat spot on the wheel while running. I took the trucks out of one (breaking the upper truck retaining clip in the process, which isn't listed as an available piece in the parts list) and didn't notice anything out of the ordinary.
So I went to check the wheelset gauge. The axle drive gear was split on all four axles. I checked the other GP30. Same thing, all four were split. Makes me wonder if I should go check my other Proto 200 engines for the same problem.
Is this a common problem on Proto 2000 units?
I dropped in the wheelsets out of my Athearn GP50 (since the Proto 2000 is basically a clone of the Athearn drive), and the noise went away and the engine ran great. I think I'll order Athearn parts as replacements, as I've never seen this problem with them...
So I went to check the wheelset gauge. The axle drive gear was split on all four axles. I checked the other GP30. Same thing, all four were split. Makes me wonder if I should go check my other Proto 200 engines for the same problem.
Is this a common problem on Proto 2000 units?
I dropped in the wheelsets out of my Athearn GP50 (since the Proto 2000 is basically a clone of the Athearn drive), and the noise went away and the engine ran great. I think I'll order Athearn parts as replacements, as I've never seen this problem with them...