Does anybody happen to know a CSX engineer named Buddy? I'm not sure which yard he was out of, but my parents and I met him back in the mid-90's on the CN&L near Little Mountain, SC. Last I heard 5+ years ago, he was running intermodal trains somewhere in GA. After some debate, I've decided to include the story that goes along with this request.
As I mentioned, this happened back in the mid-90's. His train was waiting on a siding for another train to pass. At the time, the line was CTC, with manual switches and phone boxes at each end of the siding. It wasn't uncommon during long waits for the crew to uncouple the locomotives from their trains and run down to the town diner. Sometimes crew members would take short jogs into town.
Being a kid living near a siding, I had an interest in trains. That being said, there were quite a few trains through there back then and most of the time, we didn't give them a second thought; however, that day we decided to walk over and see the train.
It was a loaded coal train and we were taking a look at the locomotives when we noticed a guy jogging toward the train. We were quite a ways back from the tracks, but he apparently noticed our interest and came over to introduce himself. I don't remember the exact conversation - I was shy - but it apparently came up that I liked trains.
It wasn't long at all before he invited us aboard the lead locomotive. It was a wide cab something-or-another...pretty sure it was a GE, but I never learned the different locomotive types or models. Bright yellow nose, dark blue cab, and light blue/grey down the side. I had seen trains all my life, but I remember being amazed at the size of this thing; I had never been this close. The first step, seeming so small from my normal safe distance, was tall.
Once on board, we met the conductor. Regrettably, I can't remember his name. While the conductor and my parents talked, Mr. Buddy took me to the engineer's side of the locomotive and began showing me the controls. The reverser, the throttle, brakes, bell, whistle, etc...my parents tell the story of them and the conductor standing there watching two kids at the controls, not knowing which one was having more fun.
Then, the time came. He let me turn on the bell. Then the horn twice...that was cool...I didn't know what it meant at the time. Remember, I was a kid, probably 6 or 7 at the time. Then he told me to move a couple of levers. We were moving! Barely, but we were! He stopped us, made a few adjustments, then told me to move a couple of levers again. We slowly crept back to where we started.
It probably wasn't more than 10 feet, but here I am, a kid doing something I thought I would only ever dream of!
We didn't stick around for long...the whole thing probably lasted less than 15 minutes. We let them get back to work. They both signed a CSX field kit (the marker has long faded) and gave it to me to take home. I'm 27 years old now, and as crazy as it sounds, I still have that kit.
At that time, I had no idea what an impact those few minutes would have. From that point, I knew all the way through 11th grade that I wanted to work for the railroad...any railroad. From there, I had the grades to get into college. I earned my degree and have worked hard but, despite trying, unfortunately still haven't made my way into a railroad career. I still have a passing interest in trains...I wave at the crews if they happen to be in view. Even with the knowledge of the long hours, tough schedules, and the many other real life challenges to life on the railroad, it's still on my incredibly short list of careers that I'd love to have. The harsh reality is, that may never happen...but I intend to keep trying. Either way, I'll always have the memory of the day I got to move a coal train...and that's all thanks to Engineer Buddy.
As I mentioned, this happened back in the mid-90's. His train was waiting on a siding for another train to pass. At the time, the line was CTC, with manual switches and phone boxes at each end of the siding. It wasn't uncommon during long waits for the crew to uncouple the locomotives from their trains and run down to the town diner. Sometimes crew members would take short jogs into town.
Being a kid living near a siding, I had an interest in trains. That being said, there were quite a few trains through there back then and most of the time, we didn't give them a second thought; however, that day we decided to walk over and see the train.
It was a loaded coal train and we were taking a look at the locomotives when we noticed a guy jogging toward the train. We were quite a ways back from the tracks, but he apparently noticed our interest and came over to introduce himself. I don't remember the exact conversation - I was shy - but it apparently came up that I liked trains.
It wasn't long at all before he invited us aboard the lead locomotive. It was a wide cab something-or-another...pretty sure it was a GE, but I never learned the different locomotive types or models. Bright yellow nose, dark blue cab, and light blue/grey down the side. I had seen trains all my life, but I remember being amazed at the size of this thing; I had never been this close. The first step, seeming so small from my normal safe distance, was tall.
Once on board, we met the conductor. Regrettably, I can't remember his name. While the conductor and my parents talked, Mr. Buddy took me to the engineer's side of the locomotive and began showing me the controls. The reverser, the throttle, brakes, bell, whistle, etc...my parents tell the story of them and the conductor standing there watching two kids at the controls, not knowing which one was having more fun.
Then, the time came. He let me turn on the bell. Then the horn twice...that was cool...I didn't know what it meant at the time. Remember, I was a kid, probably 6 or 7 at the time. Then he told me to move a couple of levers. We were moving! Barely, but we were! He stopped us, made a few adjustments, then told me to move a couple of levers again. We slowly crept back to where we started.
It probably wasn't more than 10 feet, but here I am, a kid doing something I thought I would only ever dream of!
We didn't stick around for long...the whole thing probably lasted less than 15 minutes. We let them get back to work. They both signed a CSX field kit (the marker has long faded) and gave it to me to take home. I'm 27 years old now, and as crazy as it sounds, I still have that kit.
At that time, I had no idea what an impact those few minutes would have. From that point, I knew all the way through 11th grade that I wanted to work for the railroad...any railroad. From there, I had the grades to get into college. I earned my degree and have worked hard but, despite trying, unfortunately still haven't made my way into a railroad career. I still have a passing interest in trains...I wave at the crews if they happen to be in view. Even with the knowledge of the long hours, tough schedules, and the many other real life challenges to life on the railroad, it's still on my incredibly short list of careers that I'd love to have. The harsh reality is, that may never happen...but I intend to keep trying. Either way, I'll always have the memory of the day I got to move a coal train...and that's all thanks to Engineer Buddy.