by chuxter26
The 5600 series usually measure between 15'6 and 15'8-too high for the Morristown Line east of Denville(15'5 restriction)
Railroad Forums
Moderator: David
blockline4180 wrote:That would have been a sight to see. But the issue with the height with the rebuild 38-2s and 38-3s is purely horn related.nick11a wrote:Nick,Shark wrote:The NS H-02 traded in the 5638 for an ex-Lehigh Valley GP38AC #310, now NS GP38-2 #5655 at Washington yard this morning.So, they still got the 3054. They've had that one for a while. Well, with the tons of GP38-2 rebuilds recently, they need to have at least one "old style" GP38-2 or 40-2 or whatever so that they can do Reheis with the wires in Summit with the problem of the rebuild 38-2s and 38-3's horns not having enough clearance for the wires there.
A few years after the NS takeover of Conrail I remember seeing a B40-8 fly past me at Convent Station. I don't know if he went all the way down to Summit, but it is possible. I don't know the height or width of those engines, but they must be similar or taller then the rebuilt GP38-3's. So I don't know how true that is about the rebuilds not clearing the wires in Summit.
blockline4180 wrote: A few years after the NS takeover of Conrail I remember seeing a B40-8 fly past me at Convent Station. I don't know if he went all the way down to Summit, but it is possible. I don't know the height or width of those engines, but they must be similar or taller then the rebuilt GP38-3's. So I don't know how true that is about the rebuilds not clearing the wires in Summit.The ex-Conrail GP38's and 40's barely clear the wire in Summit. Most of the GE's are lower than EMD's. The B40-8 is 15' 3" above the cab mounted antenna. The ex-CR GP's are around 15' 3". The ex-Conrail B23-7's that have been retired were the lowest engines with a height of 14' 11" over the top of the long hood of the radiator.
Shark wrote:blockline4180 wrote: A few years after the NS takeover of Conrail I remember seeing a B40-8 fly past me at Convent Station. I don't know if he went all the way down to Summit, but it is possible. I don't know the height or width of those engines, but they must be similar or taller then the rebuilt GP38-3's. So I don't know how true that is about the rebuilds not clearing the wires in Summit.The ex-Conrail GP38's and 40's barely clear the wire in Summit. Most of the GE's are lower than EMD's. The B40-8 is 15' 3" above the cab mounted antenna. The ex-CR GP's are around 15' 3". The ex-Conrail B23-7's that have been retired were the lowest engines with a height of 14' 11" over the top of the long hood of the radiator.
washingtonsecondary wrote:What is the power for H-02 now? is it 'new' or is it what they had last week?Should be "new", but I don't know what it is...
washingtonsecondary wrote:oddly enough, the stretch of track between hackettstown and washington has flashers at the crossings. I wonder why conrail then NS never put them in west of Washington.Don't know, maybe Conrail had plans to abandon that portion since there is only one customer left between Washington and P'burg. Who knows! Anyway, it was the H65 from Allentown that hit the truck and killed the driver.
pumpers wrote:This was between Washington and Phillipsburg on theNothing criminal about it. There are crossings on main line tracks with only crossbucks or stop signs. These are usually private crossings or streets with very little traffic. At most of these crossings it is not required to ring the bell or blow the whistle, but it is done anyway.
Phillipburg line I think.
Not even flashers at the crossing.
I can't believe in this day and age there are still regularly active
grade crossings in NJ without at least flashers.
Seems almost criminal to me.