Freight car truck identification

General discussion about locomotives, rolling stock, and equipment

Moderator: John_Perkowski

Post Reply
User avatar
talltim
Posts: 207
Joined: Wed Jun 08, 2011 6:16 am
Location: Chesterfield, UK

Freight car truck identification

Post by talltim » Wed Jan 02, 2019 6:28 pm

Can anyone identify this truck type? It’s under an Evans built coil gondola.
http://canadianfreightcargallery.ca/cgi ... 268detail2" onclick="window.open(this.href);return false;
It’s definitely at least a 100 ton, possibly a 125 ton. I’ve had it suggested that it’s a 125 ton Buckeye, but I’ve not managed to find an identified photo of one to compare.
Tim David

DutchRailnut
Posts: 22151
Joined: Thu Mar 11, 2004 8:02 pm
Location: released from Stalag 13
Contact:

Re: Freight car truck identification

Post by DutchRailnut » Wed Jan 02, 2019 7:32 pm

http://mrr.trains.com/~/media/import/fi ... trucks.pdf" onclick="window.open(this.href);return false;
If Conductors are in charge, why are they promoted to be Engineer???

Retired Triebfahrzeugführer. I am not a moderator.

AlKaLI
Posts: 221
Joined: Mon Jan 21, 2013 8:08 pm

Re: Freight car truck identification

Post by AlKaLI » Mon Jan 14, 2019 2:51 pm

@talltim:

The truck in question has to be 125-ton. Look at the other pictures for P&LE 42268. The Load limit (LD LMT) 238,500 lbs and Light weight (LT WT) 76,500 lbs add up to 315,000 lbs. This is the limit on 125-ton trucks. Buckeye trucks tended to be 6-axles. Perhaps this is a 125-ton Barber truck?

However, I find the photos and the car itself very intriguing. P&LE 42268 is a modified Evans "breadbox" covered coil gondola car. I believe there were only 60 units built, 50 for the P&LE and 10 for the B&LE. The car originally had a cover made of 2 circular pieces that split open and dropped along the sides to allow for loading and unloading of steel coils. Take a look at the picture of the gondola car and between the "26" and "8" you can see the guide on which the cover used to ride along on.

See the attached link:

https://lionelllc.wordpress.com/2014/07 ... coil-cars/" onclick="window.open(this.href);return false;
Fair Use
The subject for this week’s post is a very obscure prototype that actually found its way into the Lionel product line in the 1970s. Although only 60 of the prototype cars ever existed, they have been reproduced by the thousands in HO scale by Lionel and other manufacturers.

Post Reply

Return to “General Discussion: Locomotives, Rolling Stock, and Equipment”